A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.
All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.
Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.
The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.
Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.
RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.
The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.
The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.
TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.
All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.
Further Vandewiele innovations to be unveiled by the company at ITMA 2019 will include:
The INCA (interlacing by non-continuous air) system for BCF extrusion systems – a new method for intermingling BCF yarns which greatly improves tangle knot uniformity for significant cost savings.
The new VSi32 Velvet Smart Innovator jacquard, in combination with the latest Smart Creel, for the production of Italian velvet – combining the potential of flat woven jacquard fabrics with pile yarns leading to the potential for the creation of whole new range of fabrics for the home and for fashion.
The latest Superba MCD/3 space-dyeing machine, which is capable of handling a layer of 72 ends with an unequalled range of spot length, especially for ultra-short spots of below 25mm, enabling true ‘one-pile/one-colour’ in carpet production.
The Vandewiele Cobble Colortec L+, whichis now the most versatile tufting machine available on the market.
A range of jacquards from Vandewiele Bonas, demonstrated across ITMA 2019 above flat weaving machines from the industry leaders, as well as Vandewiele’s own RCE2+.
The completely revised Titan 5540 carpet finishing machine from Vandewiele Titan, which is now able to accommodate carpets with straight, round and complexly-shaped corners simultaneously.
The VandewieleArraycam 5420 optical inspection system which is suitable for monitoring standard fabrics on all common tricot warp knitting machines.
The latest IRO-ROJ weft insertion technologies.
Come and see us in Hall 4, at stand A206, during ITMA 2019.
- Fabrics & Processing2022.01.15THE WORLD’S LARGEST KHADI NATIONAL FLAG WILL BE PRESENTED IN JAISALMER WHICH IS 225 FEET LONG, 150 FEET WIDE AND 1400KG
- Articles2021.12.28INDIA’S EXPORTS OF TECHNICAL TEXTILES WITNESSED A HIKE
- Articles2021.12.28TECHTEXTIL INDIA 2021: FOREIGN INVESTMENT OPPORTUNITIES IN TAMIL NADU
- News & Insights2021.12.22PICANOL LAUNCHES NEW “CONNECT” GENERATION AIRJET & RAPIER WEAVING MACHINES