Home Textiles

Aprons of the latest generation for ring and small spinning machines from Accotex

Published: May 17, 2023
Author: DIGITAL MEDIA EXECUTIVE

The most recent Accotex apron, model NO-79201, is constructed with innovative materials that offer improved performance and longer life. Field tests reveal better resilience over the course of a 12-month spinning cycle, and both ring and compact spinning machines are adaptable enough to handle various fibre types. For a variety of applications, the NO-79201 is available as top and bottom aprons in a wide range of dimensions.

A new generation of aprons for ring and small-scale spinning machines is the Accotex NO-79201. It is constructed of two rubber compounds that are in alignment and provide a spinning apron that is very abrasion and crack resistant. The rubber compounds’ mechanical resilience enables their efficient usage on all ring and compact spinning machines, functioning with all fibre types and across the entire range of yarn counts. The fantastic friction Especially upon machine startup, the compound’s characteristics help the apron run smoothly and evenly throughout its service life.A customer in the USA evaluated the new Accotex NO-79201 for a full year alongside the NO-78210GX, NO-78210G, and a competitor’s apron. Over the course of the whole apron life, the friction values of the various aprons were tested at regular intervals. Each column displays the specific inner layer friction value as measured on typical apron samples during the course of the field test at 3, 6, and 9 months. The inner layer friction of the new NO-79201 is essentially unchanged after 12 months of operation, proving the apron’s smooth and even functioning over its whole service life. this outstanding Other Accotex clients from throughout the world processing various fibre kinds, blends, and yarn counts have similarly experienced friction behaviour. Additionally, compared to what they may anticipate, these trial consumers have observed significantly less broken bottom aprons.

For a variety of applications, the Accotex apron NO-79201 is offered in a wide range of dimensions as top and bottom aprons. It is available with a closed apron, a bottom with skives, or a bottom that has skives and pre-glue. The NO-79201 can be delivered with a plain interior or a knurled variant, a particularly designed inside layer pattern . The fundamental advantage of the knurled apron is to provide the nose bar less contact surface, allowing for reduced torque and consequently less stress on the bottom roller. bearings. As a result, the interior structured apron may operate cleanly on purportedly “dirty” fibres and perform effectively under challenging environmental conditions. The diameters of the knurled apron are 72.5, 76.3, and 79.0 mm.

Overall, with less machine downtime, the new Accotex NO-79201 spinning apron offers better performance for ring and compact-spinning. Its adaptable use may help lower stocking levels and streamline servicing procedures.

 

Related Posts