The term finishing includes all the mechanical and chemical processes employed commercially to improve the acceptability of the product, except those procedures directly concerned with colouring. The objective of the various finishing processes is to make fabric from the loom or knitting frame more acceptable to the consumer. Finishing processes include preparatory treatments used before additional treatment, such as bleaching prior to dyeing; treatments, such as glazing, to enhance appearance; sizing, affecting touch; and treatments adding properties to enhance performance, such as preshrinking. Newly formed cloth is generally dirty, harsh, and unattractive, requiring considerable skill for conversion into a desirable product. Before treatment, the unfinished fabrics are referred to as gray goods, or sometimes, in the case of silks, as greige goods.
Finishing formerly involved a limited number of comparatively simple operations evolved over the years from hand methods. The skill of English and Scottish finishers was widely recognized, and much British cloth owed its high reputation to the expertise of the finisher. More sophisticated modern finishing methods have been achieved through intense and imaginative research.
Preparatory treatments
It is frequently necessary to carry out some preparatory treatment before the application of other finishing processes to the newly constructed fabric. Any remaining impurities must be removed, and additives used to facilitate the manufacturing process must also be removed. Bleaching may be required to increase whiteness or to prepare for colour application. Some of the most frequently used preparatory processes are discussed below.
Burling and mending
Newly made goods, which frequently show imperfections, are carefully inspected, and defects are usually repaired by hand operations. The first inspection of woollen and worsted fabrics is called perching. Burling, mainly applied to woolen, worsted, spun rayon, and cotton fabrics, is the process of removing any remaining foreign matter, such as burrs and, also, any loose threads, knots, and undesired slubs. Mending, frequently necessary for woolens and worsteds, eliminates such defects as holes or tears, broken yarns, and missed warp or weft yarns.
Bleaching
Bleaching, a process of whitening fabric by removal of natural colour, such as the tan of linen, is usually carried out by means of chemicals selected according to the chemical composition of the fibre. Chemical bleaching is usually accomplished by oxidation, destroying colour by the application of oxygen, or by reduction, removing colour by hydrogenation. Cotton and other cellulosic fibres are usually treated with heated alkaline hydrogen peroxide; wool and other animal fibres are subjected to such acidic reducing agents as gaseous sulfur dioxide or to such mildly alkaline oxidizing agents as hydrogen peroxide. Synthetic fibres, when they require bleaching, may be treated with either oxidizing or reducing agents, depending upon their chemical composition. Cottons are frequently scoured and bleached by a continuous system.
Drying
Water, used in various phases of textile processing, accumulates in fabrics, and the excess moisture must eventually be removed. Because evaporative heating is costly, the first stage of drying uses mechanical methods to remove as much moisture as possible. Such methods include the use of centrifuges and a continuous method employing vacuum suction rolls. Any remaining moisture is then removed by evaporation in heated dryers. Various types of dryers operate by conveying the relaxed fabric through the chamber while festooned in loops, using a frame to hold the selvages taut while the fabric travels through the chamber, and passing the fabric over a series of hot cylinders. Because over drying may produce a harsh hand, temperature, humidity, and drying time require careful control.
Reference: https://www.britannica.com/topic/textile/Textile-finishing-processes
https://akhdiecasting.com/10-manufacturing-trends-your-startup-needs-to-know/
