Environment/Ecosystem | Technical Textiles & Non-Wovens

Recycled yarn – the future reality now

Published: March 28, 2023
Author: DIGITAL MEDIA EXECUTIVE

Spinning yarn blends of virgin and recycled fibers is a much bigger challenge than any  other commonly used blend. But the results can still be acceptable with comprehensive  quality testing, know-how and experience – as well as the new Uster Statistics 2023 edition  as a vital benchmarking tool.  

The European Union has defined a strategy for sustainable and circular textile production, to  make the sector greener and more competitive. Part of this 2030 Vision for Textiles calls for all  textile products on the EU market to be durable, repairable and recyclable – and largely made of  recycled fibers. Many leading retailers are also championing the use of recycled materials from  2030 onwards.  

The use of mechanically recycled fibers in spinning has specific quality considerations: such  fibers have a higher short fiber and nep content and may often be colored, particularly if post consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness.  Officially, a yarn can only be branded `recycled´ when spun with more than 20% recycled fibers.  This is set by the Global Recycled Standard (GRS), a voluntary product specification for tracking  and verifying the recycled content of materials in a final product.  

Spinning recycled yarns 

Blending virgin and recycled cotton together is well known as a challenge for spinners. The  smartest spinners and world-class processes simply can’t overcome the fact that some important  quality parameters will be adversely affected. It’s clear that the use of recycled cotton in a blend  with new fiber will impact on both the overall yarn strength and its CV%. Even the most  sophisticated spinning machinery won’t fix the problem.  

Awareness of the risk of yarn quality deterioration with recycled fiber blends means that quality  control is the only way to assure customer satisfaction. Even then, the task is far from simple.  When spinning new materials, Uster strongly recommends taking both numeric test results and  graphic evaluations into account, to eliminate the risk of problems in further processing.  

Avoiding fabric defects  

Spinners face major difficulties because of the high proportion of short fibers in recycled cotton  (CO-R) and the fact that, when mixing with virgin cotton (CO), the fiber length distribution is  sometimes suboptimal. This results, for example, in incorrect guidance of short fibers in the  drafting system and potential draft errors.  

In tests, a Ne 20 rotor yarn of 75% CO and 25% CO-R was compared with a 100% cotton yarn.  The values for evenness, imperfections and hairiness were measured and produced a CVm% of  22% in Uster Statistics, which might appear to indicate excellent quality for the recycled yarn if  relying on numeric values alone. In fact, closer analysis with Uster Tester spectrograms showed a  draft error at the draw frame. In this case, the problem was detected before causing an uneven  structure in the subsequent fabric made from the yarn. 

Common language for better communication  

It is an unavoidable fact that blending virgin and recycled cotton will make some quality  parameters worse. Using recycled fiber is often desirable, but it creates a new reality for the  industry. To cope with the risks, better communication and a common understanding are needed  throughout the textile value chain.  

Uster’s common language of quality will be – once more – vital in improving communication  throughout the textile industry. For 66 years, Uster Statistics have been the only globally accepted quality benchmark and the foundation for industry-wide quality improvement. The new  edition, to be launched at ITMA 2023, includes for the first time a section for recycled yarn.  

The Uster Statistics 2023 edition features an extended range of fiber data, supporting  sustainability goals. An ideal fiber mix – with or without recycled content – also ensures meeting  quality requirements for least waste. Fiber graphs will be newly available for every process step. 

The new reality  

Spinners need to find a way to transform their mills to a more sustainable future. The challenge of  spinning recycled yarns must be acknowledged, and the big goal here is to succeed with it.  Spinners already have the tools they need, allowing them to benefit from both laboratory  instruments and quality monitoring systems to optimize quality and productivity. Their experience,  combined with Uster knowledge and latest technology in quality control and analysis systems, are  a promising basis for a sustainable future for the textile industry.  

The new reality of the need for closer communication and cooperation will include all players from  fiber to fabric. It’s an essential debate for everyone – and Uster is ready to take the lead.  

Related Posts

Witness the new-age, smart & innovative products catering the garment & textile manufacturing industry at Gartex Texprocess India