GRS 5.0 Is Here: What Textile Exporters Must Re-Check Before 31 December 2026

A transition checklist for mills, traders and buyers moving from GRS 4.0 to 5.0
GRS 5.0 took effect on 1 July 2026, and audits from 31 December 2026 must be against the new version. This Industry View separates the 20% certification threshold from the 50% labelling threshold, explains what a Scope Certificate and a Transaction Certificate each prove, and gives exporters a ten-question check to run before the audit cycle closes.
Two dates matter more than any other line in the transition. GRS 5.0 was published and took effect on 1 July 2026. From 31 December 2026, audits must be conducted against 5.0; 4.0 can no longer serve as the audit basis. Between those dates, a certificate and an audit report can legitimately refer to different versions. Exporters who read only the certificate date can miss that gap.
This article is not a summary of 5.0. It is a list of what an exporter should re-check, in the order a buyer or certification body is likely to ask.
1. Separate the certificate from the audit basis
A GRS certificate is not a statement that the holder has been audited against the latest version. It states that a site and a product scope were certified under a named standard version, by a named certification body, for a defined period. The audit report behind it has its own date and version.
Before 31 December 2026, ask three questions of every certificate you rely on: Which version was the audit conducted against? When was the audit? When does the certificate expire? A 4.0 certificate may still be in circulation during the transition, but it does not answer an audit question about 5.0. If a buyer asks for "GRS 5.0 compliance", a 4.0 certificate alone is not the answer.
The practical step is to build a version column into your certificate register. Most exporters already track holder, site, product and expiry. Add "standard version" and "audit date" beside them. The two columns catch the problem before a buyer does.
2. Keep the 20% and 50% thresholds apart
GRS 5.0 applies to products with at least 20% recycled content, provided the social, environmental and chain-of-custody requirements are also met. That is the certification threshold. A product-specific GRS label requires at least 50% recycled content. That is the labelling threshold.
The two numbers answer different questions. Twenty percent asks whether a product can enter the certification system. Fifty percent asks whether the product can carry a product-specific label. A product at 30% can be certified but cannot carry the label. A product at 60% can carry the label only if the rest of the chain and the brand's own certification also support the claim.
Two details cause most of the confusion. First, the label must state the exact percentage, not a generic "GRS certified". Second, the percentage belongs to a defined product and component. A recycled nylon/spandex fabric may carry recycled content in the nylon while the spandex remains virgin. The certificate and the label have to say which component the percentage refers to. "Recycled" without a component and a number is not a GRS claim.
Certification also stops at the boundary of the certified scope. A GRS-certified fabric does not make the finished garment GRS-certified. The cut-and-sew factory, the printer, the embroiderer and every other site that handles the product must be inside the chain, and the brand's own certification must support the label. Buyers often discover this at the garment stage, when the fabric certificate is valid but the garment factory is not in scope. Map the chain before the order, not after the label is printed.
3. Treat section D2 as a chemical chain, not a clause
The chemical restrictions sit in section D2, which references the REACH Candidate List of substances of very high concern and the ZDHC Manufacturing Restricted Substances List. The standard points to the ZDHC MRSL, and the version question matters: the buyer and the certification body need to be auditing against the same list.
For a dyehouse, D2 is not a single declaration. It is a chain of evidence: the dyestuffs and auxiliaries in the chemical store, the safety data sheets and MRSL conformance statements behind them, the batch records that show what was actually used, and the SVHC declarations for anything not covered by the MRSL. A dossier that lists products but cannot connect them to a batch is not a chemical inventory.
For trim suppliers, the list is longer than most exporters expect: elastic, thread, labels, zippers, coatings and adhesives. These are often bought from smaller suppliers who have never been asked for an MRSL statement. The audit question is not "do you have a certificate?" It is "which substances in this trim are restricted, and what evidence shows they are controlled?"
4. Do not use a Scope Certificate as a Transaction Certificate
A Scope Certificate (SC) proves that a site and a product scope are certified. A Transaction Certificate (TC) proves that a specific shipment is covered by that certification. They answer different questions, and one cannot replace the other.
An SC is time-limited, commonly 12 months, and names the site, the products and the certification body. A TC is issued per shipment and ties the seller, the buyer, the product, the quantity and the date to the certified scope. A buyer who receives only an SC has no evidence that the goods in the container are covered. A supplier who issues a TC without a valid SC has no basis for the transaction. A TC is a chain-of-custody document, not a certificate of origin or a customs declaration; it proves the transaction is covered, not that the fiber in a finished garment came from a specific bale.
The check is mechanical, and that is the point. Match the SC holder to the invoice seller. Match the SC product scope to the product description. Match the TC quantity to the shipment and confirm it sits within the SC scope. Confirm the TC date falls inside the SC validity. If any of those four do not line up, the claim is not ready, even when every document looks official.
5. Read the small-trader exemption narrowly
GRS 5.0 keeps a narrow exemption for small traders: annual GRS product turnover below US$10,000, no repackaging and no relabelling, and registration with the certification body. It is not a "no paperwork" route. It is a defined exemption for a small trading activity, and it disappears the moment the trader repacks or relabels.
If a supplier claims the exemption, ask for the certification body's registration and the turnover basis. If the supplier repacks or relabels, the exemption does not apply. The cost of getting this wrong is not the exemption; it is a claim that cannot be defended in an audit.
6. What to change before the audit cycle closes
Four changes cover most of the gap.
Update the scope certificate: confirm that every site that handles the product, including dyeing, printing, bonding and trimming, is named. A subcontractor outside the scope is outside the claim.
Update the chemical file: map every dye, auxiliary and trim to the MRSL version and the SVHC list in use, and keep the batch evidence that connects the file to production.
Update the labels and the sales language: state the exact percentage, remove "GRS certified" where no percentage is given, and make sure the brand's own certification supports any label use.
Update the contracts: require an SC copy, a TC per shipment, and a written standard version in the quality or compliance schedule. A clause that says "GRS certified" without a version is a clause that will be read differently by each side.
7. Ten questions to ask before 31 December 2026
- Which GRS version was the audit conducted against, and when?
- Is the Scope Certificate valid, and does it name the exact site?
- Does the SC product scope match the fabric or garment being shipped?
- What is the certified recycled percentage, and which component does it cover?
- Is there a Transaction Certificate for this shipment, with seller, buyer, product, quantity and date?
- Does the TC quantity sit within the SC scope and validity?
- Are all subcontractors, including dyeing, printing and bonding, named on the SC?
- Which ZDHC MRSL version and which REACH SVHC list were checked?
- Does the label state the exact percentage, and is the brand certified to use it?
- If the small-trader exemption is claimed, is the CB registration documented?
The claim should not outrun the certificate
The transition is not a documentation exercise. The risk is a claim that moves faster than the evidence: a sales team that says "GRS" for a product below the label threshold, a TC issued for the wrong site, a chemical file that cannot be tied to a batch. Each of those is a commercial risk before it is a compliance risk.
Before 31 December 2026, do three things. Put the standard version and audit date into the certificate register. Collect a TC for every shipment, not a folder of SCs. And make the chemical file answer the MRSL and SVHC questions at batch level. If a supplier cannot name the version and the site, the claim is not ready, however good the certificate looks.
References
- Textile Exchange, Global Recycled Standard 5.0 (GRS-101-V5.0), effective 1 July 2026.
- Textile Exchange, GRS Claims Policy (TE-301), current version.
- ZDHC Manufacturing Restricted Substances List (MRSL), version as agreed with the certification body.
- EU REACH Candidate List of Substances of Very High Concern, current version.
Author bio
Wenruo is a fabric development engineer at Forall Lab, Haining Forall Digital technology Co.,Ltd., China. Wenruo works on knit fabric construction, testing and supplier qualification for activewear programs, and writes about the boundary between fabric properties and finished-garment performance. Company website: https://www.foralltex.com/