Industry And Cluster | News & Insights

Flushable wipes: a big step towards sustainable hygiene

Published: November 26, 2020
Author: TEXTILE VALUE CHAIN

In today’s COVID-19 induced new normal, health and hygiene have become ever more essential needs across the globe. Dry or wet wipes are widely used today in a number of hygiene-related applications – both domestic and personal. And as wipes are usually made from nonwovens, nonwoven manufacturing processes have taken on a renewed importance in the textile industry with many textile manufacturers looking for end-to-end solutions in all aspects of wipe manufacturing.

However, dry or wet wipes can be difficult to dispose as they can clog sewage systems due to their failure to disintegrate in water. Landfilling of used wipes is just not a sustainable option. To counter this problem, Voith Group (Division: Paper) and Truetzschler Nonwovens joined hands to develop flushable wipes. These wipes can simply be flushed down the toilet without worry because they disintegrate into individual fibres in agitated water.

Wet-laying technology

The wet-laid process for nonwovens is similar to the making of paper. The first step involves suspension of fibres and water to form a slurry, so that single fibres of different types are evenly distributed in the water. The web is formed when the slurry is passed over a wire belt. When the water is sucked off through the belt, a homogeneous fibre mat is formed. The spunlacing process performed by the AquaJet system on this fibre mat further produces nonwovens that feel like textiles.

Unlike the carding process where longer fibres are required, wet laying can utilise fibres as short as 2 mm up to 15 mm to form the web. In principle, every fibre that is dispersed in water can be wet-laid. Hence, fibres of low cost like wood pulp i.e., cellulose fibres, man-made and mineral fibres, etc., can be used. The WLS (wet-laying/spunlacing) process does not require any binders as hydro-entangling the single fibres gives the nonwoven adequate strength. Wipes produced through wet-in-wet (i.e. a combination of wetlaid and AquaJet processes) are extremely versatile.

Truetzschler Nonwovens in collaboration with Voith Paper offers the following solutions for manufacturing wet-laid nonwovens:

HydroFormer from Voith Group

Most conventional dry or air-laid sheet forming processes are based on the use of long fibres. This meant that in the past, it was often not possible to use the less expensive and more environmentally friendly pulp fibres for nonwoven production. To close this gap, Voith’s HydroFormer acts as a bridge between paper and nonwoven production.
The HydroFormer concept for wet-laid nonwovens builds on Voith’s long-standing experience from the paper and pulp industry which predominantly uses short fiber cellulosic feedstock. Inexpensive and biodegradable, thanks to a very high dilution in suspension, nonwovens produced by the HydroFormer can be produced entirely out of renewable, cost-efficient cellulose feedstock. Apart from the obvious cost savings and environmental benefits, this process offers homogeneous sheet formation and considerable flexibility for multi-ply end products. It also enables the manufacturing of disposable cleaning wipes from 100% biodegradable materials. Voith’s HydroFormer has been specifically optimised for the formation of wet-laid nonwovens. With more than 70 successful installations, the HydroFormer has gained worldwide acceptance.

Benefits of the HydroFormer

▪ Cost effective use of raw materials
▪ Renewable materials used exclusively
▪ Considerable minimisation of fibre losses due to re-use
▪ Simple one step manufacturing of multi-ply products
▪ Extensive flexibility in raw material use

AquaJet for spunlacing from Truetzschler Nonwovens

After the web is formed in the HydroFormer, it needs to be bonded to add strength and function. It is in this bonding step that the know-how from Truetzschler is applied. Web bonding is performed with the help of the AquaJet. In this field, Truetzschler Nonwovens draws on its extensive experience of more than 100 projects running worldwide.
Compared with other web bonding methods, the AquaJet spunlacing process does not use chemical binding agents or bicomponent fibres but relies only on the momentum of water jets to entangle the fibres with one another. Continuous high-pressure water jets strike the loose nonwoven web, which is moved through on a belt underneath the water bar, while suction fans remove the water used. The bonding increases tensile strength and lends the material the soft feel of a textile. Structures and perforations can also be created, if required.

Benefits of the AquaJet

▪ Use of environmentally friendly and inexpensive raw materials
▪ Produces soft nonwovens
▪ Natural bonding process using water only
▪ High savings potential – thanks to optimised pump and vacuum performance
▪ Integrated system for excellent nonwoven quality

In harmony with the environment

Apart from short fibres being used, the Voith-Truetzschler process avoids the use of chemical binders to bond the web formed. This reduces the raw material cost for making nonwovens. Compared to oil-based materials like PET/PP fibres, cellulose fibres do not burden the environment after use. Wipes produced entirely from these degradable fibres in a customised wet-laid spunlacing process can therefore be conveniently flushed down the toilet.

Both the AquaJet and the HydroFormer have been developed with water conservation in mind. The water from the process is filtered via a shared water cycle with downstream production steps, and then treated and returned to the manufacturing process. Flushable products must pass a defined test sequence developed by INDA and EDANA, the North American and European nonwovens associations.

A.T.E. represents Truetzschler Nonwovens in India. A.T.E. is a leader in textile engineering with over 80 years of experience and offers solutions across the textile value chain – spinning, weaving, knitting, nonwovens, processing, synthetics, technical textile, carpet, and made-ups. A.T.E. is the only company in India and perhaps in the world with such bandwidth in textile engineering.
A.T.E. also operates in the areas of wastewater treatment, heating and cooling solutions, IoT for industry, flow technology, and value-added equipment for textiles, packaging, etc.

Related Posts