Articles | Fibres and Yarns | In-Depth Analysis | News & Insights | Textile Articles

Clothing From Soya-Bean Fibre

Published: March 12, 2019
Author: TEXTILE VALUE CHAIN

After nearly a hundred years of development, chemical synthetic fibers gradually matured in the 20th century. Despite the fact that chemical synthetic fibers (polyester, acrylic, nylon) of various features have become one of the major raw materials of the global textile industry, it has certain drawbacks which are as follows:

  1. It relies on gradually depleting oil resources
  2. Some products produce pollution during production
  3. The comfort of chemical fiber products is less than that of natural fibres

In order to overcome the fatal weaknesses of chemical fibers, efforts will mainly be made in three aspects

  1.  Adopting natural resources from agriculture, animal husbandry and forestry, which are abundant and cheap.
  2.  Using production processes which must be clean and friendly to the environment
  3.  Being more comfortable to the skin of the human body

One of the fibre, which passes all above mentioned characteristics, is Soyabean fibre. It is the Healthy and Comfortable fibre of the 21st century. At present, only industrialized countries have invested heavily in developing new fibres for the new century.

Soyabean is mainly cultivated for its seeds. It is widely believed that the Soyabean originated in China, 4000-5000 years ago. Soyabeans have been one of the staple foods of oriental countries for thousands of years. They are rich in a protein which resembles casein. In America, soyabeans are now cultivated in great quantity as a source of edible oils and protein. Many attempts have been made to spin this protein into useful fibres. The Ford Motor Company has pioneered in this field; production by company began in 1939 and reached more than three tons a week by 1942. The fibre was used for making car upholstery. Production was taken over in 1943 by the Drackett Products Co. of Cincinatti, but stopped after a few years.

                     At the moment, the United States of America has become the world leader in Soyabean production with 46% of the world market. Other countries with high Soyabean production are Brazil (20%), Argentina (14%) and China (9%). Soyabean Protein Fibre (SPF) is a kind of regenerative plant fibre. It is made directly from vegetable sources rather than animal sources. It is the only renewable botanic protein fibre we can touch today. SPF is a unique Active Fibre. Its 16 amino acids are healthy and nutritional to people’s skin.

Production of Soyabean fibre

Soyabeans have a high protein content (about 35%) and they are grown in abundance in U.S. and eastern countries. China has taken the world lead in the industrialized production of soyabean protein fibre. They provide a cheap and readily available source of protein for fibre production. Soyabean fibre can be obtained from soyabean. 100 kg of soyabean residue can be extracted from 40 kg of protein. There are five main steps to produce soyabean fibre.

  1. Extraction of oil to obtain oil-free meal – First the beans are cleaned, cracked, decorticated and dehulled. After a conditioning step at about 70 degree c, the beans are steeped in hexane to remove the oil. The oil can be extracted by pressing and extraction. The hexane solution is drawn off and the oil is extracted from this solution. The oil free bean is known as meal. The oil is a valuable by-product and so it is separated out. The resulting oil-free soybean meal is passed through a steam –jacketed pipe for removal of the solvent.
  2. Extraction of protein – The separation of protein from the oil-free meal is accomplished by steeping the meal in dilute alkalis like 1% Sodium Sulphite for one hour to one half hour. The protein is dissolved by this treatment and can be filtered out to separate the protein. The protein is precipitated by means of acid. Sulphuric acid is added and the pH of the solution is made to 4.5. This is near the iso-electric point of Soyabean protein, i.e. at its minimum solubility and therefore will be precipitated. This Soyabean protein thus separated out is a creamy –white powder.
  3. Preparation   of spinning solution – The spinning solution is prepared by dissolving the extracted protein in an alkaline solution. Caustic soda is used for dissolution. The solution is filtered and deaerated by means of vacuum to remove all undissolved particles and air bubbles. After filtration, the solution is allowed to age at the requisite temperature. During the ageing period, the solution becomes more viscose and develops the proper consistency for spinning.
  4. Fibre formation – Soyabean fibre is formed by wet spinning method. The spinning operation consists of forcing the spinning solution through spinneret. The spinneret consists of several holes and it is emerged in the coagulation bath. The solution emerging from the spinneret holes is referred as liquid jet. The liquid jet precipitated as fine filaments in the coagulating bath containing 2% sulphuric acid and 15% sodium sulphate or sodium chloride for dehydration.
  5. After–treatments – Further treatments are required for the development of properties of the fibres like stretching and hardening. Stretching can be done in a separate bath, while the filament is soft and it induces orientation by rearrangement of the molecules and it enhances strength and durability of the filaments.  Hardening can be done with formaldehyde to enhance the filaments with more strength and elasticity. The fibre performance can also be stabilized through hydroformylation. It is dried under controlled humidity and temperature, after which it is cut into desired lengths. It is then ready for shipment. 

PROPERTIES OF SOYABEAN FIBRE

Properties Soyabean Silk Wool Cotton
Tenacity g/den 0.25-0.8 1-1.5 1.5-2.0 2-5.5
Elongation ,% 50 25-45 25-40 6-10
Density gm/cm3 1.29 1.34-1.38 1.33 1.50-1.54
Moisture regain , % 8.6 11.0 14-16 9
Acid resistance excellent excellent excellent Bad
Alkali resistance good good bad Excellent
Resistance to moth/fungus good Resistance to fungus but not to moth Resistance to fungus but not to moth Resistance to moth but not to fungus
U.V resistance good bad bad good
Dry breaking extension % 18-21 14-25 25-35 7-10

 The Soyabean fibres are of low strength, and are sensitive to moisture to the extent of losing 69 percent of their tenacity when wet. It has better fineness, low specific gravity, high tensile elongation, and good acidic and alkali resistance. It is similar to natural fibres such as wool, silk, etc. this new fibre is considerably cheaper than real silk (around one third of the cost of silk) and can partially replace silk. Its moisture absorption performance is equivalent to cotton, and its permeability is greatly better than cotton, ensuring better comfort.

               The breaking strength of single filament of this fibre is over 3.0 cN/dtex, higher than the strength of wool, cotton and silk, and equivalent to chemical fibres like polyester. The fineness can reach even 0.9 dtex. The initial modulus of Soyabean protein fibre (SPF) is quite high, the boiling water shrinkage is low, and so the size stability of fabric is good. The anti-crease performance is also outstanding, and it is easily and quickly cleaned and dried. The Soyabean protein fibre (SPF) has good affinity to human skin. The natural colour of Soyabean fibre is light yellow, like the colour of silk. With good fastness to light and perspiration, it also has good dyeing brilliance and dyeing fastness in comparison with real silk products. Fabric from pure soyabean protein fibre (SPF) has got natural colour and pure with abundant fluff on the surface without pilling, excellent hand and drape and softness.

Blending of Soyabean fibre

The development of textile process makes the soyabean fibre able to be blended with any other fibres at any proportion, without problems in production. It can be easily blended as below

  1. Soyabean/ Cashmere blended fabric has natural softness and puff feeling like cashmere. It is suitable for cashmere sweater, shawl and coat.
  2. Soyabean/Silk blended fabric has good luster, draping, sweat transfer properties. It is suitable for printing silk, knitting underwear, sleepwear, shirts and evening dress.
  3. Soyabean / Wool blended fabric reduce the shrinkage of wool which is important for manufacturing & processing of sweater. It is suitable for wool sweater, interlock underwear and blanket.
  4. Soyabean/Cotton blended fabric has soft handle, good moisture absorption and better resistance to bacteria. It is suitable for men’s and women’s underwear, t-shirt, infant wear, towel and beddings.
  5. Soyabean/ Synthetic blended fabric has good wrinkle resistance. It is suitable for spring and summer fashion apparel, underwear, shirt and sportswear.
  6. Soyabean/ lycra blended fabric – by adding a small portion of lycra the fabric becomes more elastic and easier for washing and caring. It is quite active and charming.

CHEMICAL PROCESSING OF SOYABEAN PROTEIN FIBRE 

Soyabean protein fibre (SPF) has different physical and chemical construction from natural protein fibre, care is taken  in the following steps:

  1. De -sizing– In pre-treatment of Soyabean fibre oil, lubricants and pigments and other additives, which are added in the production process, are removed. Desizing is done by using enzyme, alkali or oxidant desizing. Mercerization is avoided because Soyabean is unable to bear the strong caustic soda. The enzyme desizing is done by using the following recipeAmylase enzyme – 2-6 gpl.
  2. Glauber salt – 2-3 gpl.
  3. Wetting agent – 1 gpl .
  4. Temperature – 55 – 60 deg c.
  5. Time – 60 mins.
  1. Scouring & Bleaching– The natural color of Soyabean is curcuma – it is difficult to remove Soyabean s pigment – therefore bleaching of Soyabean is done by any three waysa. Hydrogen peroxide bleaching
  •  Reduction bleaching
  •  By using both

The recipe for  Hydrogen peroxide bleaching is as below

Hydrogen peroxide – 20-40 gpl.

Soda ash – 3-5 gpl.

Wetting agent – 2-3 gpl.

Stabilizer – 3-8 gpl.

pH – 11

Temperature – 92-95 deg c.

Time – 60-80 mins.

Similarly the recipe for reduction bleaching is as below ;

Rongolite – 3-8 gpl.

Soda ash – 2-4 gpl.

Scouring agent – 1-2 gpl.

pH – 11

Temperature – 92-95 deg c .

Time  -60-80 mins .

If required suitable optical brightener is also used.

  1. Dyeing  –Soyabean can be dyed using reactive, acid, basic and 1: 2 metal complex dyes. Dyes are selected according to end uses of fibres and dyeing fastness. In industry Soyabean fibre is dyed using vinyl sulphone and bifunctional type of reactive dyes. The dyeing method is just like dyeing of cotton and viscose with reactives.  It can be dyed in form of loose fibre, tops, yarn, hank and fabric. (both knitted and woven).

USES OF SOYABEAN PROTEIN FIBRE (SPF)

The fabric made of soyabean protein fibre shows the luster of real silk; its drapability is also very good, giving people the sense of elegance; the textile woven with high –count  yarn has fine and clear grain, suitable for high–grade shell fabric for shirts. The knitting fabric which uses soyabean protein fibre has a soft and smooth handle, and the texture is light and thin, with the sense of blending real silk and cashmere. With regard to its moisture absorption and discharge performance, permeability performance, heat-retaining performance and spinning performance, this fibre is referred now as “a healthy and comfortable fibre in the 21stcentury.”

Dr N.N.Mahapatra

President, COLORANT LTD

Related Posts

Birla Cellulose Ranks No.1 & Sustains Dark Green Shirt Rating in Canopy’s Hot Button Report 2023 for Fourth Consecutive Year